Valenzuela Trabaho - Feed

AUTOMECHANIC

Graduate of TESDA Vocational course (Automotive)
With or without experience
Knowledgeable in basic vehicle troubleshooting
Willing to be trained and perform tasks related to the job

Minimum Salary + Applicable incentive

WORK SCHEDULE: MON-FRI

WALK IN APPLICANTS ARE WELCOME MONDAY TO FRIDAY 9AM TO 1 PM

LOCATION: 1749 ALVAREZ STREET, STA. CRUZ, MANILA

IT Technical Support

JOB REQUIREMENTS

Graduate of a four-year IT-related course
At least two (2) years of experience in a technical support role
Strong knowledge in networking, printer and computer hardware software systems/OS installation & restoration
Proficient in diagnosing and resolving system, network, and hardware/software issues

COMPANY DRIVER

Naghahatid ng mga delivery sa store na galing sa warehouse

May abilidad na makabisado lahat ng stores na sinusuplayan ng produkto

Maalam sa lugar na dinadaanan

Flexible sa ibang gawain na maaaring ipagawa ng supervisor

Delivering and checking off (if required) goods at customers’ premises

Perform daily inspections on all assigned vehicles, at the beginning of each shift.

Completing trucking sheets and run sheets with all relevant information.

Collecting goods according to instructions and completing associated paperwork.

Carrying out routine daily checks on the vehicle you are driving and reporting any faults to transport ASAP. Completing the daily inspection sheet prior to setting off and reporting any defects that occur during the course of the working day.

Abiding by current driver’s hours, rules and regulations including working time directives. Ensuring legal breaks are taken and tachographs are completed correctly.

Available to work required shifts and overtime during the week and on the day as required.

Qualifications/Requirements

Male / 20-36 years’ old

With a professional driver’s license (rest. 123)

At least Vocational or High school graduate

With certificate of employment

With at least 6 months to 1-year experience

Willing to work in a fast-paced environment

With Defensive Driving certificate is an advantage

Must know how to preventive maintenance and basic troubleshooting

Familiar in Metro Manila Area and nearby provinces

Punctuality and reliability are very important

Remarks

Hi candidates!

Thank you for your application for the job position you are applying for with our company. Symanpro Manpower Service Contractor Corporation were excited to learn more about you and your qualifications.

We are pleased to invite you in our main office located at 34 LJ Building Unit 3, 2nd Floor, Maysan Road, Malinta, Valenzuela City for in-person interview. We are open from Monday to Friday, 8:00 AM to 5:00 PM. This will be the chance for us to discuss your experience and qualifications in more detail as well as for you to learn more about the position and our company’s culture.

Additionally, if you know someone who also seeking for a job, you can bring him/her along with you. We are also offering different opportunities to all job seekers searching for a better tomorrow.

Please don’t forget to bring the following documents:

· SSS ID/ E1/ Verification Slip

· Philhealth/MDR Form

· Pag-ibig/MDF Form

· Tin Verification/ BIR Tin

· Clearances (NBI/ Police Clearance/ Barangay Clearance)

· PSA / NSO/ Live Birth

· Diploma (College o High School)/ TOR)

· Vaccination Card

· Loan voucher

Thank you and looking forward to hearing from you.

Best regards,

SYMANPRO MANPOWER SERVICE CONTRACTOR CORPORATION

Utility Staff

We are looking for a hardworking and dependable Utility Staff to help maintain the cleanliness, safety, and organization of our office and work areas. The ideal candidate is physically fit, responsible, and willing to perform various housekeeping and support tasks.

Key Responsibilities:

Maintain cleanliness and orderliness of office, shop, and common areas.
Sweep, mop, dust, and sanitize workspaces, restrooms, and other facilities.
Dispose of trash and ensure proper waste segregation.
Replenish cleaning supplies and restroom necessities.
Assist in moving office furniture, equipment, and materials when needed.
Support other departments with general utility and maintenance tasks.
Perform other duties as assigned by the immediate supervisor.

Qualifications:

At least High School Graduate or Senior High School Graduate.
Preferred Male only.
Previous experience as a Utility Staff, Janitor, or Housekeeping Staff is an advantage but not required.
Physically fit and capable of performing manual tasks.
Honest, hardworking, and trustworthy.
Can work with minimal supervision.
Willing to render overtime when necessary.
Willing to work Monday to Saturday.

OFFICE STAFF

Performs clerical duties including typing, filing, and completion of simple forms.
Operates office machines including copiers, scanners, phone and voicemail systems, personal computers, and other standard office equipment.
Answers phones, directs calls to appropriate individuals, and prepares messages.
Copies, sorts, and files records related to office activities, business transactions, and other matters.
Prepares letters, memos, forms, and reports according to written or verbal instructions.
Sorts incoming mail and delivers to appropriate department or individual; processes outgoing mail.
Maintains filing systems either manually or electronically.
Manages calendars and schedules appointments.
Performs other related duties as assigned.

Required Skills/Abilities:

Ability to type at least 45 words per minute.
Excellent verbal and written communication skills.
Excellent interpersonal and customer service skills.
Excellent organizational skills and attention to detail.
Excellent time management skills with a proven ability to meet deadlines.
Proficient with Microsoft Office.

DEPARTMENTS THAT NEEDS OFFICE STAFF

RETAIL SALES
MARKETING
AUDIT

DRAFTSMEN

Create technical drawings, manufacturing schematics, and architectural plans based on given specifications and calculations.
Collaborate with designers, constructors, and engineers on projects.
Revise drawings and layouts to accommodate changes and enhancements.
Accommodate safety procedures and issues in installation and construction drawings.
Prepare and present detailed drawings of architectural designs and plans for the kioks/ stores and structures according to specifications provided by architect.
Assess potential problems and suggest remedial measures.
Review engineering drawings and designs to ensure adherence to established specifications and standards.
Ensure drawings and designs are accurate and complete.
Use computer-aided design and drafting (CADD) software to prepare drawings.
Stay updated with emerging technologies, software, and trends in the drafting field.

WAREHOUSE STAFF

Unloading incoming shipments and checking their paperwork, such as purchase orders
Inspecting shipments for damaged or missing products
Organizing items and storing them in the correct location
Picking and transporting items to fulfill orders
Packing, labeling and documenting items for outgoing shipping
Processing and documenting returns and reshelving items
Cleaning and organizing warehouse work areas to support fire safety, such as designating areas for flammable materials
Participating in occasional audits and inventory counts

MARKETING ASSOCIATE

A Marketing Associate provides marketing and administrative support to the marketing team to help accomplish various marketing activities

Duties and Responsibilities

· Provide support to the marketing department by working with the marketing team in managing the brand and marketing initiatives.

· Develop and execute marketing campaigns and strategy.

· Monitor and assist with social media accounts, create content and respond to messages

· Assist with promotional activities

· Maintain schedules for marketing initiatives.

· Organize and manage marketing collateral

Qualifications:

Bachelor’s degree in marketing, advertising, communication or related field
At least 1 year experience in marketing or advertising gained from retail or FMCG environment.
Working knowledge of current trends and best practices in marketing and advertising
Proficient in handling social media accounts and platforms and content creation
MS Office proficient

JR BUYER

What you’ll be doing

Identify and source the most suitable suppliers for a wide range of materials, components, and services required by our manufacturing operations
Negotiate contracts and agreements with suppliers to secure the best possible terms, including pricing, delivery, and quality
Monitor and manage the procurement process, ensuring timely delivery of materials and components to meet production schedules
Collaborate with internal stakeholders, such as production, logistics, and finance teams, to understand and anticipate procurement needs
Maintain detailed records and reporting on procurement activities, costs, and supplier performance
Continuously seek opportunities to improve procurement processes and strategies to drive cost savings and operational efficiency

What we’re looking for

Minimum of 2 years’ experience as a Buyer or Procurement Specialist in the manufacturing industry
Strong understanding of supply chain management, inventory control, and procurement best practices
Excellent negotiation and contract management skills
Proficient in data analysis and reporting, with the ability to use procurement-related software and systems
Strong communication and interpersonal skills to effectively collaborate with internal and external stakeholders
Ability to work under pressure and meet tight deadlines
Bachelor’s degree in Supply Chain Management, Logistics, Business, or a related field

FORKLIFT OPERATOR

Unload materials and merchandise from incoming vehicles and stack them to assigned places.
Operates the machine in a safe and efficient manner
Provides product support to keep stocks and materials in the right order and row
Ensuring that the products being transferred are free of any damage and will arrive in the correct container intact.
The Forklift operator is responsible for operating a forklift to move, locate, relocate, stack, and count merchandise. The operator is accountable for the safe and efficient operation of the vehicle and may also be required to perform Order Filler and Checker duties.

RECEIVING / PUT-AWAY

Unload inbound shipments safely and move product to storage locations.
Efficiently stack and store merchandise in the appropriate areas.

QUALITY

Ensure inbound and outbound shipments are accurate and free of damage. Report quality variances.

ORDER PICKING

Pull and prepare product for shipment, ensuring that the exact number that meets customer product is loaded and shipped. Perform picking duties in an efficient manner that meets customer service standards.

LOADING

Efficiently move product from staging and / or storage areas into rail cars or trailers.

EQUIPMENT

Load, unload, move, stack, and stage product and materials using a forklift, clamp truck, or other power equipment. Use radio frequency equipment for picking, receiving, put away, and load functions, as
Maintain the facility’s equipment and materials in a neat, clean, and orderly fashion. On a daily basis, inspect and perform minor maintenance on the forklift or other equipment.
Operate all equipment in a safe and efficient manner following prescribed work methods.

SAFETY, SANITATION, SECURITY

Maintain a clean, neat, and orderly work area. Assist in maintaining the Security of the warehouse. Conduct operations in a manner that promotes safety.

RESEARCH AND DEVELOPMENT SUPERVISOR – MONOBLOCK

Research and Development Supervisor – Monoblock

Polyfoam RGC-International Corporation (Uratex)
#1608 Sapang Bakaw St. Service Road, Lawang Bato, Valenzuela City

Job Function

Research and Development Supervisor – responsible for leading the research, development, and optimization of plastic formulations and products within the Business Unit. The role oversees New Product Introduction (NPI), Value Analysis/Value Engineering (VAVE), laboratory operations, research initiatives, cost optimization, and team performance to achieve departmental KPIs while ensuring product quality, innovation, and regulatory compliance.

Key Responsibilities

Product and Formulation Development

Lead the development, evaluation, qualification, and optimization of plastic formulations for new and existing products.
Prepare formulation specifications, costing, and quality evaluations.
Drive cost reduction initiatives through formulation improvements and efficient material utilization.
Support regulatory compliance, product certifications, and product claims.

Research and Innovation

Conduct research on sustainable materials, new technologies, and emerging market trends.
Evaluate alternative and low-cost materials for product improvement and cost savings.
Collaborate with suppliers, consultants, and research institutions on product innovation.
Prepare technical reports and maintain research documentation.

Project and Cost Management

Lead departmental plans and programs to achieve business objectives and KPI targets.
Prepare and monitor annual and monthly budgets, including CAPEX requirements.
Track project costs, timelines, and deliverables to ensure successful implementation.

Leadership and Team Management

Supervise the daily operations of the R&D Plastics Laboratory.
Develop work plans, assign tasks, monitor project execution, and evaluate team performance.
Promote collaboration, accountability, and continuous improvement within the team.
Coordinate corrective actions and process improvements with cross-functional departments.

Operational Excellence

Establish and improve R&D systems and interdepartmental processes.
Ensure compliance with company policies, ISO standards, and quality management requirements.
Support company productivity and continuous improvement programs such as SGA, 7S, ISO, and related initiatives.
Perform other duties that may be assigned by Management in support of organizational objectives.

Qualifications

Bachelor’s Degree in Chemical Engineering, Materials Engineering, Industrial Engineering, Mechanical Engineering, or a related field.
At least 3–5 years of experience in Research & Development, Product Development, or Manufacturing, preferably in the plastics industry.
Experience in formulation development, project management, and product innovation is an advantage.
Strong leadership, analytical, communication, and problem-solving skills.
Possesses a positive attitude, flexibility in a multi-tasked environment, and the ability to manage priorities effectively.
Must be amenable to work in Valenzuela City.

Benefits:

Additional leave
Company Christmas gift
Company events
Employee discount
Free parking
Health insurance
On-site parking
Opportunities for promotion
Paid training
Promotion to permanent employee
Staff meals provided

Calling all Chemical Engineering/ Chemistry Graduates

Job description:

Quality Assurance Analyst (Fresh Graduates Welcome)

Position: Quality Assurance (QA) Analyst
Department: Quality Assurance
Location: Valenzuela
Employment Type: Full-Time

About the Role

We are looking for motivated and detail-oriented Chemistry graduates to join our Quality Assurance team. This is an excellent opportunity for fresh graduates who are eager to apply their scientific knowledge in ensuring product quality, safety, and compliance with regulatory standards.

Key Responsibilities

Conduct quality inspections and testing of raw materials, in-process products, and finished goods.
Monitor compliance with quality standards, Good Manufacturing Practices (GMP), and company procedures.
Prepare and maintain quality documentation, reports, and records.
Assist in investigating quality issues, non-conformances, and customer complaints.
Support audits, validations, and continuous improvement initiatives.
Coordinate with Production, Quality Control, and other departments to ensure product quality requirements are met.
Ensure laboratory and quality assurance activities comply with safety and regulatory guidelines.

Qualifications

Bachelor’s Degree in Chemistry, Industrial Chemistry, Chemical Technology, or related field.
Fresh graduates are encouraged to apply.
Strong analytical and problem-solving skills.
Detail-oriented with excellent organizational skills.
Proficient in Microsoft Office applications.
Good verbal and written communication skills.
Willing to work in a manufacturing or laboratory environment.

Preferred Qualifications

Knowledge of GMP, or quality management systems is an advantage.
Experience in laboratory analysis, research projects, or internships related to quality assurance is a plus.

What We Offer

Competitive salary and benefits package.
Comprehensive training and development programs.
Career growth opportunities within Quality Assurance and related functions.
Supportive and collaborative work environment.

Job Type: Full-time

Work Location: In person

Preventive Maintenance

Job Summary

We are seeking a reliable and detail-oriented Preventive Maintenance Technician to join our team. The successful candidate will be responsible for performing scheduled maintenance inspections and tasks to ensure the proper functioning, safety, and longevity of equipment, machinery, and facilities. This role plays a critical part in minimizing downtime and improving operational efficiency.

Key Responsibilities

Perform routine preventive maintenance on equipment, machinery, and facility systems in accordance with established schedules
Inspect mechanical, electrical, and HVAC systems to identify potential issues before breakdowns occur
Troubleshoot and repair equipment when necessary
Maintain accurate maintenance records and documentation
Coordinate with operations and production teams to schedule maintenance activities
Ensure compliance with safety regulations and company standards
Recommend improvements to maintenance processes and equipment reliability
Assist in emergency repairs and breakdown response as needed

Qualifications

Technical/vocational diploma or equivalent in Mechanical, Electrical, or related field
Proven experience in preventive maintenance or similar role
Strong knowledge of mechanical and electrical systems
Ability to read and interpret technical manuals, drawings, and schematics
Basic troubleshooting and repair skills
Familiarity with maintenance tools and equipment
Good communication and teamwork skills

Preferred Skills

Knowledge of safety and compliance standards
Ability to work under minimal supervision
Strong attention to detail and problem-solving skills

Work Conditions

May involve working in shifts, weekends, or on-call duties
Exposure to industrial environments, noise, and varying temperatures
Requires physical activities such as lifting, climbing, and standing for extended periods

Why Join Us

Competitive salary and benefits
Opportunities for professional growth and training
Supportive and collaborative work environment

Job Type: Full-time

Work Location: In person

Quality Assurance Staff

WE ARE HIRING: QUALITY ASSURANCE (QA) STAFF

We are looking for a dedicated and detail-oriented Quality Assurance (QA) Staff to ensure that our products and processes meet established quality and safety standards.

Job Description:
The QA Staff is responsible for monitoring operations, conducting inspections, and ensuring compliance with company policies and regulatory requirements.

Key Duties and Responsibilities:

Perform quality inspection of products and processes
Monitor compliance with company standards and regulatory requirements
Prepare and maintain accurate documentation and reports
Conduct process monitoring to ensure consistency and efficiency
Recommend and assist in implementing corrective actions
Provide training and guidance related to quality standards
Assist during internal and external audits

Qualifications:

Graduate of Food Technology, hospitality or relative courses
Strong organizational and multitasking skills
Detail-oriented and able to work in a fast-paced environment
Good communication and coordination skills
Ability to analyze basic production data and reports
Strong sense of responsibility and leadership potential
Willing to do field works

Schedule: Monday to Saturday

Requirements:

Graduate of Food Technology, Engineering, HRM, Food Service, any Business related courses.
With at least 1 year of relevant work experience in Food industry

Job Types: Full-time, Permanent

Liaison Officer

Job description:

Main Responsibilities:
– Facilitate and process various government permits and mandatory requirements for business compliance
– Apply for building permit and occupancy permit
– Monitor and track the status of permits and licenses, ensuring timely renewal of all necessary documents to prevent lapses in compliance.
– Maintain accurate and organized records of all permits, licenses, and other essential documents for the business.
– Address and resolve any issues that may arise during the permit processing or compliance process.
– Communicate with internal departments to gather necessary information for submissions and provide updates to management on the status of permit-related transactions.

Qualifications:
– Graduate of any engineering degree is a plus
– With atleast 1 year work related experience
– Willing to commute to different LGUs
– Preferably residing near QC for ease of commute

Job Types: Full-time, Permanent